Before approving embroidered T-shirts for a clothing collection, review the decoration on the intended garment, not just the artwork. Your approval should identify the fabric, artwork version, embroidery dimensions, position and inside finish. Treat any uncompleted checks as open decisions rather than assuming that a good front photograph settles them.
This guide concentrates on the decorated area of a T-shirt. Use the complete clothing sample review checklist for fit, construction, labels and packing, and the embroidery service guide when choosing a decoration technique.

Start with a sample identity sheet
Give each sample a reference that connects the physical shirt to the specification being reviewed. Record the garment size and colour, fabric reference, artwork revision, decoration dimensions and date received. Ask the supplier to identify substitutions. A sample made with an alternative fabric may help with design development, but it should not silently become the production reference.
Separate three approvals: the appearance of the embroidered design, its position on the garment, and the finished shirt. This makes it possible to accept a thread colour while still requesting a correction to placement or fit.
Check fabric and decoration together
Embroidery puckering can involve several interacting factors, including stitch density, tension, stabilisation and how the fabric was held during stitching. Madeira’s puckering guidance recommends testing the design on the fabric and adjusting the setup. A photograph alone cannot identify which production setting caused a ripple.
For your review, lay the shirt naturally on a flat surface without pulling the fabric smooth. Photograph the entire garment and then the decorated area. Note where ripples appear: outside the border, inside filled sections or between letters. Send those observations with the sample reference instead of prescribing an unverified machine adjustment.
If the factory proposes a different fabric or a revised design, request a clearly labelled new sample. Do not compare two versions without recording what changed.

Three T-shirt situations that need different review notes
A small logo on a light-coloured tee
Inspect both the stitches and the surrounding fabric in ordinary light. Check whether the backing outline is visible from the front, then turn the shirt inside out to identify the area concerned. Keep lighting and camera distance consistent when comparing options. A photograph on a dark table and one against a light background may give different impressions; record the viewing conditions rather than treating them as equivalent evidence.
Ask for the backing reference used on that particular sample. If your range includes pale and dark colourways, specify which combinations require separate review instead of approving them all from one dark shirt.
A broad or densely filled chest design
Look beyond edge sharpness. Handle the shirt and review how the decorated area moves relative to the surrounding knit. Does it meet your intended feel, or does the panel feel noticeably stiff? Record the observation and ask the supplier to propose a revised sew-out. A proposed change in size, fill or backing needs your visual approval as well as a physical review; do not assume it will preserve the original design.
A sleeve or chest logo across several sizes
Lay the relevant samples in the same orientation. Compare the logo with the specified landmarks rather than aligning shirts by their bottom hems. Record the shirt size beside each photograph and distinguish a design-size change from a placement-offset change. If a sleeve seam limits the intended position, resolve the revised position before accepting the sample.
Review the inside, not only the front
The photographs in this guide illustrate external appearance only. They do not show the backing or document comfort and care testing; the following checks are general review steps, not verified results for the pictured shirt.
Ask for a photograph of the inside directly behind the embroidery. The outside back of a T-shirt does not show this area. Request the backing specification and check the actual garment for how the decorated area feels against the body. The backing and stitch construction should be considered together; neither an attractive front nor the word “soft” in a quotation establishes wearer comfort.
Madeira’s technical FAQ identifies backing, stitch density and thread choice as contributors to embroidery stiffness. Record your comfort concerns and have the supplier review the combination rather than assuming that removing all backing is an appropriate correction.
Turn placement into measurable instructions
A mockup communicates the visual direction, but the production brief also needs reference points. State the embroidery width and height and show how its position is measured from agreed garment landmarks. Label the measurement units. For a left-chest design, make clear whether a measurement locates the design edge or its centre.
Specify which shirt size the placement reference belongs to. Decide whether dimensions and offsets remain fixed across sizes or need separate instructions. Review representative sizes before approving a size range; one sample does not document every size.
Keep care checks separate from appearance approval
If post-wash appearance matters to the order, agree the procedure and acceptance criteria before testing. Record the care conditions, sample identity and photographs before and after. Ask which checks have actually been completed and which are proposed. Do not treat an unwashed sample photograph as evidence of wash durability or colourfastness.
For a changed fabric, backing or embroidery version, decide whether the earlier check still applies. Keep that decision with the revised specification.
A practical approval record
- Sample identity: reference, date, garment size, colour and fabric reference.
- Design: artwork revision, intended dimensions and physical thread-colour reference.
- Placement: measurement landmarks, units and size-range instructions.
- Front review: observations on lettering, edges and fabric flatness, supported by photographs.
- Inside review: backing identification and comments from handling the garment.
- Care review: agreed procedure, completed checks and unresolved questions.
- Decision: accepted details, required corrections, reviewer and date.
Avoid a general “approved” message if some points remain unresolved. Identify the exact version accepted and whether a revised physical sample is needed before bulk production. Keep a reference sample and the written approval together.
Prepare your embroidery enquiry
For a discussion with Eking Clothing, prepare the artwork, intended decoration size, garment reference, placement drawing, quantity and destination. Include any specific inside-finish or care requirements. Ask for confirmation of feasibility and quotation scope before treating a design or commercial term as agreed.
The embroidery file types guide explains what to supply with your artwork. When your brief is ready, send your T-shirt and embroidery requirements for review.



